MiniTC

  • The MiniTC® Adipose Processing System is a medical device that transforms autologous fat into cell-rich microfat that can be used for rejuvenation and regeneration.
  • Mini-Stem® System is a dual-function device that processes microfat and extracts Stromal Vascular Fraction (SVF).

The MiniTC® Adipose Processing System is a medical device that transforms autologous fat into cell-rich microfat that can be used for rejuvenation and regeneration.

Outside the United States, Mini-Stem System® (CE-Mark pending) is a dual-function device that processes microfat and extracts Stromal Vascular Fraction (SVF). SVF is not yet approved in the United States.

orthobiologics and holistic healing

FDA-cleared for use in the US

regenerative medicine
biologic therapies and holistic healing

What’s In The Box?

MiniTC comes complete with everything you need to extract lipoaspirate, process it into purified microfat, and reinject it for therapeutic uses. Think of it as a lab in a box!

Procedure Flow Chart

orthobiologics and holistic healing
regenerative medicine companies
bone marrow aspirate concentrate
Wise Owl Biologics complementary and alternative medicine
regenerative medicine and alternative therapies
biologic therapies
medical devices for sports injuries
biologic therapies and holistic healing

MiniTC in Two Minutes

Protocol Flow Chart

Lipoaspirate harvesting, processing, and microfat injection is all done in-clinic. MiniTC® processing can take as little as 30 minutes, and the entire procedure takes just one hour.

Click the images below for details about each step.

medical devices for sports injuries

Patented Design Assures Sterility And Quality

  • Advanced design eliminates manual shaking or filtration through syringes
  • Portable, completely sealed, closed-loop device maintains 100% sterility
  • Up to 120mL of dense fat with 40+% microfat yield can be processed – more microfat than an ordinary “syringe-only” adipose concentrating system
  • Microfat of unparalleled viability and quality is produced by gentle separation of micronized fat clusters in the liquid phase, using a separation screen with proprietary configuration and pore size
  • Multiple input and output ports make processing quick and simple

Patented Design

All input and output from MiniTC occurs through sealed valved inlets (luers), maintaining purity and sterility.

The upper compartment is between the top sealed plate and the tissue dispersion screen. The collected lipoaspirate enters here.

The middle compartment is between the tissue dispersion screen and the bottom filter. Microfat accumulates here after washing and centrifugation.

The lower compartment is below the bottom filter. Oil, blood, anesthetic, and debris are collected in this compartment.

MiniTC® Adipose Processing System Uses

Benefits include:

  • Reducing pain
  • Decreasing inflammation
  • Helping repair cartilage and soft tissue injuries
  • Improving healing and facilitating a prompt return to active lifestyle

Benefits include:

  • Reducing pain
  • Decreasing inflammation
  • Helping repair cartilage and soft tissue injuries
  • Improving healing and facilitating a prompt return to active lifestyle and sport activities.

Benefits include:

  • Facial rejuvenation
  • Improving skin texture, wrinkles, fine lines, and acne scars
  • Adding volume.

Benefits include:

  • Restoring fullness and shape
  • Adding volume
  • Decreasing skin sag
  • Erasing stretch marks.

Benefits include:

  • Improving blood circulation to chronic wounds
  • Decreasing inflammation and pain
  • Promoting faster healing and regeneration.

Why Physicians Should Love Microfat

Microfat is rich in regenerative cells, preserved in their native niche.

orthobiologics and holistic healing

Rich in regenerative cells including stromal cells, endothelial cells, and preadipocytes

  • Regenerative cells aid in healing
orthobiologics and holistic healing

Provides a structural matrix for reconstruction, rejuvenation, and healing of tissues

  • Aids in the reconstruction and rejuvenation of tissue.
orthobiologics and holistic healing

Adipose tissue is abundant and surgically accessible in patients

  • An adequate and readily attainable supply at all times
orthobiologics and holistic healing

Applied or injected to areas of injury, inflammation or for aesthetic indications

  • Flexibility and value in multiple procedures
orthobiologics and holistic healing

Minimal risk of rejection and infection

  • Minimizes side effects
orthobiologics and holistic healing

Used alone or in conjunction with other biologics

  • Physicians can choose the optimal biologic solution

MiniTC® Adipose Processing System Provider Benefits

MiniTC® is unique in its combination of high-quality output, convenience, simplicity, price, and adherence to regulatory standards.

Click the image for more details

Wise Owl Biologics complementary and alternative medicine
regenerative medicine and alternative therapies
medical device companies
holistic health and medical devices
biologic therapies
medical devices for sports injuries
biologic therapies and holistic healing

Testimonials

Our practice has been very pleased with the MiniTC Microfat Processing System. It utilizes advanced technology and is efficient and cost effective.

Dr. Steven Sampson, Sports Medicine Physician and Founder Orthohealing Center Los Angeles, CA

MiniTC® Adipose Processing System Provider Benefits

1. MiniTC Microfat can be injected with a very fine-gauge needle

2. It produces more regenerative cells and the highest quality microfat

3. Microfat can be combined with other biologics such as bone marrow aspirate concentrate (BMAC)

4. Microfat filler lasts longer than synthetic cosmetic fillers

5. Lower risk of infection means fewer complications

5 + 1. Another reason: Procedure efficiency leads to higher profit

5 + 2. The best reason: Great outcomes and satisfied patients

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedic and Sport Medicine

  1. It provides a structural matrix for reconstruction, rejuvenation, and healing of tissues
  2. It’s rich in regenerative cells including stromal cells, endothelial cells, and preadipocytes
  3. It’s versatile – can be applied or injected to areas of injury or inflammation, or for aesthetic indications
  4. It’s autologous – minimal risk of rejection and infection
  5. It can be used alone or in conjunction with other biologics

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc

  1. FDA-cleared and produced by an ISO 13485:2016 Certified and MDSAP-Certified Company
  2. Does not change your clinic workflow
  3. Highest quality and quantity output – 92% cell viability, 1.5 Mil/Ml MNC content, 12–25% ASC content
  4. Most efficient – sterile, portable, and disposable; convenient and safe
  5. Complete processing in under 30 minutes – can be done in your office
  6. Bonus: Low cost and high profit

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.

Apply a powerful dose of PurePRP in low volume samples.  Larger volumes (5-10mL) are generally not needed for small places.  PurePRP allows you to concentrate the PRP volumes as low as 2mL without losing platelets or growth factors.  This allows physicians to maintain a powerful clinical dose of PRP for the most minute of applications. Patients are guaranteed to receive the most effective dose of PRP regardless of the requirement.

The cellular biology of PurePRP® is ideal. Based on the independent data done by Principle Investigator Robert Mandle, PhD Biosciences Research Associates, Cambridge, MA, the evaluation of the cellular composition and structure of PurePRP® showed the following key points.

The PurePRP® II 2015 device produced a reduced Red Blood Cells PRP product with, on average, to 100 x 106 RCB/ml and an average hematocrit of 1.1%. Only 2% of the granulocytes were retained, a reduction of 84% from the baseline whole blood values. The PurePRP® II 2015 products had higher cell concentration and calculated cell metrics including platelet yield and concentration, RBC, mononuclear and granulocyte cell recoveries.

Only the PurePRP® II 2015 platform was capable of providing a PRP product with an optimum platelet concentration of > 1 x 106 platelets per µL (Giusti I, Rughetti A, D’Ascenzo S, et al. Identification of an optimal concentration of platelet gel for promoting angiogenesis in human endothelial cells. Transfusion 2009;49:771-8. Marx R, Garg A. Dental and craniofacial applications of platelet rich plasma. Carol Stream: Quintessence Publishing Co, Inc.; 2005)

Process PurePRP® without visible red blood cells or neutrophil granulocytes, making it the only non inflammatory PRP available. This protocol also has low viscosity for better tissue disbursement.

  1. Superior products produce great results
  2. Training/onboarding ensures you succeed
  3. Product and company support fit right into existing workflow
  4. US-based manufacturing and support
  5. Jointechlabs are visionaries who understand your needs

See additional insights by Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedics and Sports Medicine; Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Nathan Katz, CEO, Jointechlabs, Inc.

Frequently Asked Questions

Product

1. MiniTC Microfat can be injected with a very fine-gauge needle

2. It produces more regenerative cells and the highest quality microfat

3. Microfat can be combined with other biologics such as bone marrow aspirate concentrate (BMAC)

4. Microfat filler lasts longer than synthetic cosmetic fillers

5. Lower risk of infection means fewer complications

5 + 1. Another reason: Procedure efficiency leads to higher profit

5 + 2. The best reason: Great outcomes and satisfied patients

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedic and Sport Medicine

  1. It provides a structural matrix for reconstruction, rejuvenation, and healing of tissues
  2. It’s rich in regenerative cells including stromal cells, endothelial cells, and preadipocytes
  3. It’s versatile – can be applied or injected to areas of injury or inflammation, or for aesthetic indications
  4. It’s autologous – minimal risk of rejection and infection
  5. It can be used alone or in conjunction with other biologics

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc

  1. FDA-cleared and produced by an ISO 13485:2016 Certified and MDSAP-Certified Company
  2. Does not change your clinic workflow
  3. Highest quality and quantity output – 92% cell viability, 1.5 Mil/Ml MNC content, 12–25% ASC content
  4. Most efficient – sterile, portable, and disposable; convenient and safe
  5. Complete processing in under 30 minutes – can be done in your office
  6. Bonus: Low cost and high profit

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.

Apply a powerful dose of PurePRP in low volume samples.  Larger volumes (5-10mL) are generally not needed for small places.  PurePRP allows you to concentrate the PRP volumes as low as 2mL without losing platelets or growth factors.  This allows physicians to maintain a powerful clinical dose of PRP for the most minute of applications. Patients are guaranteed to receive the most effective dose of PRP regardless of the requirement.

The cellular biology of PurePRP® is ideal. Based on the independent data done by Principle Investigator Robert Mandle, PhD Biosciences Research Associates, Cambridge, MA, the evaluation of the cellular composition and structure of PurePRP® showed the following key points.

The PurePRP® II 2015 device produced a reduced Red Blood Cells PRP product with, on average, to 100 x 106 RCB/ml and an average hematocrit of 1.1%. Only 2% of the granulocytes were retained, a reduction of 84% from the baseline whole blood values. The PurePRP® II 2015 products had higher cell concentration and calculated cell metrics including platelet yield and concentration, RBC, mononuclear and granulocyte cell recoveries.

Only the PurePRP® II 2015 platform was capable of providing a PRP product with an optimum platelet concentration of > 1 x 106 platelets per µL (Giusti I, Rughetti A, D’Ascenzo S, et al. Identification of an optimal concentration of platelet gel for promoting angiogenesis in human endothelial cells. Transfusion 2009;49:771-8. Marx R, Garg A. Dental and craniofacial applications of platelet rich plasma. Carol Stream: Quintessence Publishing Co, Inc.; 2005)

Process PurePRP® without visible red blood cells or neutrophil granulocytes, making it the only non inflammatory PRP available. This protocol also has low viscosity for better tissue disbursement.

  1. Superior products produce great results
  2. Training/onboarding ensures you succeed
  3. Product and company support fit right into existing workflow
  4. US-based manufacturing and support
  5. Jointechlabs are visionaries who understand your needs

See additional insights by Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedics and Sports Medicine; Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Nathan Katz, CEO, Jointechlabs, Inc.

Science

1. MiniTC Microfat can be injected with a very fine-gauge needle

2. It produces more regenerative cells and the highest quality microfat

3. Microfat can be combined with other biologics such as bone marrow aspirate concentrate (BMAC)

4. Microfat filler lasts longer than synthetic cosmetic fillers

5. Lower risk of infection means fewer complications

5 + 1. Another reason: Procedure efficiency leads to higher profit

5 + 2. The best reason: Great outcomes and satisfied patients

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedic and Sport Medicine

  1. It provides a structural matrix for reconstruction, rejuvenation, and healing of tissues
  2. It’s rich in regenerative cells including stromal cells, endothelial cells, and preadipocytes
  3. It’s versatile – can be applied or injected to areas of injury or inflammation, or for aesthetic indications
  4. It’s autologous – minimal risk of rejection and infection
  5. It can be used alone or in conjunction with other biologics

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc

  1. FDA-cleared and produced by an ISO 13485:2016 Certified and MDSAP-Certified Company
  2. Does not change your clinic workflow
  3. Highest quality and quantity output – 92% cell viability, 1.5 Mil/Ml MNC content, 12–25% ASC content
  4. Most efficient – sterile, portable, and disposable; convenient and safe
  5. Complete processing in under 30 minutes – can be done in your office
  6. Bonus: Low cost and high profit

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.

Apply a powerful dose of PurePRP in low volume samples.  Larger volumes (5-10mL) are generally not needed for small places.  PurePRP allows you to concentrate the PRP volumes as low as 2mL without losing platelets or growth factors.  This allows physicians to maintain a powerful clinical dose of PRP for the most minute of applications. Patients are guaranteed to receive the most effective dose of PRP regardless of the requirement.

The cellular biology of PurePRP® is ideal. Based on the independent data done by Principle Investigator Robert Mandle, PhD Biosciences Research Associates, Cambridge, MA, the evaluation of the cellular composition and structure of PurePRP® showed the following key points.

The PurePRP® II 2015 device produced a reduced Red Blood Cells PRP product with, on average, to 100 x 106 RCB/ml and an average hematocrit of 1.1%. Only 2% of the granulocytes were retained, a reduction of 84% from the baseline whole blood values. The PurePRP® II 2015 products had higher cell concentration and calculated cell metrics including platelet yield and concentration, RBC, mononuclear and granulocyte cell recoveries.

Only the PurePRP® II 2015 platform was capable of providing a PRP product with an optimum platelet concentration of > 1 x 106 platelets per µL (Giusti I, Rughetti A, D’Ascenzo S, et al. Identification of an optimal concentration of platelet gel for promoting angiogenesis in human endothelial cells. Transfusion 2009;49:771-8. Marx R, Garg A. Dental and craniofacial applications of platelet rich plasma. Carol Stream: Quintessence Publishing Co, Inc.; 2005)

Process PurePRP® without visible red blood cells or neutrophil granulocytes, making it the only non inflammatory PRP available. This protocol also has low viscosity for better tissue disbursement.

  1. Superior products produce great results
  2. Training/onboarding ensures you succeed
  3. Product and company support fit right into existing workflow
  4. US-based manufacturing and support
  5. Jointechlabs are visionaries who understand your needs

See additional insights by Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedics and Sports Medicine; Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Nathan Katz, CEO, Jointechlabs, Inc.

General

1. MiniTC Microfat can be injected with a very fine-gauge needle

2. It produces more regenerative cells and the highest quality microfat

3. Microfat can be combined with other biologics such as bone marrow aspirate concentrate (BMAC)

4. Microfat filler lasts longer than synthetic cosmetic fillers

5. Lower risk of infection means fewer complications

5 + 1. Another reason: Procedure efficiency leads to higher profit

5 + 2. The best reason: Great outcomes and satisfied patients

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedic and Sport Medicine

  1. It provides a structural matrix for reconstruction, rejuvenation, and healing of tissues
  2. It’s rich in regenerative cells including stromal cells, endothelial cells, and preadipocytes
  3. It’s versatile – can be applied or injected to areas of injury or inflammation, or for aesthetic indications
  4. It’s autologous – minimal risk of rejection and infection
  5. It can be used alone or in conjunction with other biologics

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc

  1. FDA-cleared and produced by an ISO 13485:2016 Certified and MDSAP-Certified Company
  2. Does not change your clinic workflow
  3. Highest quality and quantity output – 92% cell viability, 1.5 Mil/Ml MNC content, 12–25% ASC content
  4. Most efficient – sterile, portable, and disposable; convenient and safe
  5. Complete processing in under 30 minutes – can be done in your office
  6. Bonus: Low cost and high profit

See additional insights by Dr. Nishit Pancholi, COO, Jointechlabs, Inc.

Apply a powerful dose of PurePRP in low volume samples.  Larger volumes (5-10mL) are generally not needed for small places.  PurePRP allows you to concentrate the PRP volumes as low as 2mL without losing platelets or growth factors.  This allows physicians to maintain a powerful clinical dose of PRP for the most minute of applications. Patients are guaranteed to receive the most effective dose of PRP regardless of the requirement.

The cellular biology of PurePRP® is ideal. Based on the independent data done by Principle Investigator Robert Mandle, PhD Biosciences Research Associates, Cambridge, MA, the evaluation of the cellular composition and structure of PurePRP® showed the following key points.

The PurePRP® II 2015 device produced a reduced Red Blood Cells PRP product with, on average, to 100 x 106 RCB/ml and an average hematocrit of 1.1%. Only 2% of the granulocytes were retained, a reduction of 84% from the baseline whole blood values. The PurePRP® II 2015 products had higher cell concentration and calculated cell metrics including platelet yield and concentration, RBC, mononuclear and granulocyte cell recoveries.

Only the PurePRP® II 2015 platform was capable of providing a PRP product with an optimum platelet concentration of > 1 x 106 platelets per µL (Giusti I, Rughetti A, D’Ascenzo S, et al. Identification of an optimal concentration of platelet gel for promoting angiogenesis in human endothelial cells. Transfusion 2009;49:771-8. Marx R, Garg A. Dental and craniofacial applications of platelet rich plasma. Carol Stream: Quintessence Publishing Co, Inc.; 2005)

Process PurePRP® without visible red blood cells or neutrophil granulocytes, making it the only non inflammatory PRP available. This protocol also has low viscosity for better tissue disbursement.

  1. Superior products produce great results
  2. Training/onboarding ensures you succeed
  3. Product and company support fit right into existing workflow
  4. US-based manufacturing and support
  5. Jointechlabs are visionaries who understand your needs

See additional insights by Dr. Ariana DeMers, Orthopedic Surgeon, Restore Orthopedics and Sports Medicine; Dr. Nishit Pancholi, COO, Jointechlabs, Inc.; Dr. Nathan Katz, CEO, Jointechlabs, Inc.

Let’s Connect

Contact Wise Owl Biologics to learn more about our unique blend of experience, clinical expertise, support, and superior biological devices.

Name
Intrested In